| |
MK-30-10-C-P (For components upto 1500mm length) |
|
  |
|
This machine is meant for checking of components, which have Lenght/Dia Ratio of atleast 5 and overall length from 150mm to 1500mm. Annular Components can be checked with a central conductor. Available in 3000A, which implies that jobs upto 6 ” dia can be checked on this machine. In case you require more amperage, please contact us.
Many advanced features of this machine make the testing extremely reliable, simple, fast and user freindly. Also, the life of the machine is unlimited becasue it is constructed using stainless steel.
Pneumatic clamping & use of copper braided pads eliminate chances of any sparks.
Use of Rodless Cylinder eliminates the need for frequent re-adjusting of tailstock depending upon the job length.
Machine works in three modes, Circular, Longitudinal & Combination. Sequencing & Timing of the shots is controlled by a computer in the machine.
Uses two separate transformers for Circular & Longitudinal field. This is necessary because in combination shot, an overlap period must be there for proper magnetization.
Longitudinal magnetization is achieved by using magnetizing coil. |
| |
Accessories included in the standard package
|
 |
125W UV Lamp with transformer |
|
Dark room fixture with hood & curtains |
|
Copper Braided Contact Pads |
|
Centrifugal Tube With Stand |
|
|
|
| |
Circular Magnetization Current |
3000A AC & HWDC (Half Wave DC) |
Longitudinal Magnetization |
|
Method
|
Coil (300mm dia) |
Capacity
|
10 KAT (Kilo Ampere Turns) |
Job Holding Capacity |
|
Length
|
1500mm |
Diameter
|
150mm |
Dimensions |
1850mm (W) X 600mm (D) X 1250mm (H) |
Weight |
400Kg Approx |
Power Supply Requirement |
415 V, 3 Phase 4 Wire AC , 50A Intermittent |
Tank Capacity |
20L |
Material of Tank & Collection Tray |
Stainless Steel |
Clamping System |
Pneumatic, No Need to adjust tailstock for different length of components |
Modes of Operation |
Circular, Longitudinal, Combination |
Metering |
LCD Interface |
Carrier Fluid |
Oil or Water (Use Appropriate Powder) |
|
| |
|
| Half Wave DC Coil |
| Soft Switching of Circular Field Between AC & HWDC |
| Automatic Movement of Coil with Automatic Shots at Various Positions |
| Automatic Bath System |
| LCD Display of all parameters |
| Constant Current Feature: Only the current set by opeartor will pass through the job irrespective of the resistance of the job. |
| 100 Program Memory: Current Settings, Shot Sequencing, Current Type, Shot Timing, Coil Movement can be programmed for 100 different type of components and can be recalled whenever required. |
| Secondary Current Control-- No Generattion of Harmonics on Power Line |
| Entire Machine is controlled by a computer |
| In Built Auto Reducing Demanetizer |
| Current Failure Indicator |
| Option of automatic Calculation of Current Settings based on the geometry & material of the job |
| Entire Body made of Stainless Steel |
|
|
|
| |
| |
| |
Salient Features |
|
 |
Technical Information |
Browse through our technical literature |
|
|
|
|
|
Works & Office
Plot No. 332,
Industrial Area
Phase-2,
Chandigarh-160031
India
Phone: +91-172-5087128
Fax: +91-172-4640332
Email: sales.chd@compactech.co.in
Contact Person: Mr. Raman Singla
Mobile: +91-9814073987
Sales & Service Office
11, First Floor, Roshan Market, Vishawkarma Chowk, G.T. Road, Ludhiana
Phone: +91-161-2539493
Fax: +91-161-2532767
Contact Person: Mr. Sunil Bansal
Mobile: +91-9815510062
|
|
